Epoxy flooring FAQ

Epoxy and resin floors: your questions answered.

Straight answers about cost, timings, finishes, preparation and where we work. Anything else, ask Jak in the quote form or the chat.

Bare concrete floor before resin is laid
Illustrative image

FAQ

Everything people ask us

More answers about epoxy and resin floors

How much does an epoxy floor cost?

Every floor is priced on its size, the condition of the concrete and the finish, so Jak prices each job properly rather than guessing. Surveys and quotes are free and there is no obligation.

How long does an epoxy floor take?

It goes down in stages: preparation and repairs, primer, the body coat, then a protective top coat, with curing time between coats. Jak gives you a clear timeline with your quote, including when you can walk on it and when it can take a car.

What is the difference between epoxy and resin flooring?

Epoxy is one type of resin. People use the words interchangeably for poured, seamless floors. What matters most is choosing the right system for the space and preparing the concrete properly.

Can I see the finish before I commit?

Yes. Try the six finishes in the floor designer on our home page, then ask for sample boards so you see the colour in your own light.

Where do you work?

We are based in Bournemouth and work across Dorset, Hampshire and the South, and travel for the right projects in London, Birmingham, Bristol, Cardiff and beyond. London commercial work is a focus.

Are your reviews real?

Yes. Every review on this site is a verified Checkatrade review. J.F Coats is rated 9.67 out of 10 on Checkatrade.

Do you use subcontractors?

Jak Foster runs J.F Coats with his right-hand man Marlee Dancer beside him on every job. The people who quote your floor lay it.

Does a resin floor need special cleaning?

No. Sweep or vacuum, then mop with warm water and a mild cleaner. Avoid harsh solvents. Mats at entrances and pads under furniture keep a gloss floor looking new.

Can I drive on it straight away?

No. Resin needs time to cure. You can walk on it before you can drive on it, and Jak gives you the exact times for your floor with the quote.

Will it work in a garage gym or workshop?

Yes. It is easy to clean, seals the dust in and stands up to equipment. Tell us how the space is used in the quote form.

Will my floor look exactly like the photos?

No two metallic floors are the same, which is the point. The colours and the feel will match the finish you chose; the movement in it is unique to your floor.

Is a metallic floor slippery?

A high-gloss finish can be slippery when wet. For entrances, kitchens or commercial spaces, a fine grip can be added to the top coat.

Can you match the veining to a colour scheme?

Yes. Colours and veining can be tailored, and you can see the finish on sample boards first.

Does a marble effect floor scratch?

Any gloss floor will show fine scratches over time if grit is dragged across it. Mats at entrances and felt pads under furniture keep it looking new, and a worn top coat can be refreshed.

Is a flake floor slip-resistant?

The texture gives a little grip, and the top coat can be made more slip-resistant for wet areas. Tell us where the floor is and Jak will recommend the right finish.

Can flake go over an old painted floor?

The old paint comes off first and the concrete is ground, so the new floor bonds properly. That is what makes it last.

Can you work outside opening hours?

Tell us your hours in the quote form. Jak will plan the stages and curing times with you so the space is out of use for as short a time as possible.

Can the floor be in our brand colours?

Yes. Solid colours, metallics and flake blends can be made to suit a brand, and you can sign off sample boards before work starts.

How long will we be without the room?

It depends on the size and the system. The floor goes down in stages with curing time between coats. Jak gives you a clear timeline with your quote.

Can resin go over an existing floor?

Usually the old covering comes up and the concrete or screed is prepared so the resin bonds to a sound surface. Jak checks this on the survey.

Can you price a whole scheme?

Yes. Choose Development in the quote form and add the number of plots, sizes and your timescales.

Do you work to a site programme?

Yes. Tell us your programme and the trades before and after us, and Jak will plan the stages and curing times around them.

Do you only do preparation, without a resin floor?

Preparation is usually part of a full floor, but ask: tell us what you need in the quote form.

How do you know if a floor has damp?

Jak checks the slab on the survey. If there is a risk of moisture coming up, a liquid damp-proof membrane is recommended before the floor.

Free survey, no obligation

Book your free survey.

Tell us about the floor. Jak will come back to you to arrange a free survey and a clear, written price. No pressure, no hard sell.

  1. Send the formTwo minutes. It goes straight to Jak’s inbox.
  2. Jak gets in touchTo talk it through and book the survey.
  3. Free survey and quoteHe looks at the slab and prices it properly.
What are we flooring?

Free quote